Polk Audio DXI124 720-Watts 12in Automotive Subwoofer

- 05/02/2012 I have this sub, just one, in a Fierce Audio XED bandpass enclosure and it's really impressive. Only running off an old 100 watt punch amp I took from my brother. ...	- BestBuyFreak05 02/15/2012 Bought it to feel my box and amp simply because the last sub I had was blown. I absolutely love the quality for the price!
- alaws12 01/13/2012 Truly. Bought on/near Black Friday for 55. I've been researching Polk for awhile and have only heard good things about them. Finally have one of my own, it is paired ...	- AudioLover 12/19/2011 Takes a decent amount of power for 360 Watts RMS and if you set it up right it'll sound very decent, solid bass and decent quality from Polk Audio. Very decent ...
- Nick1171 08/16/2010 i have 1 12" hooked up to my alpine mono1000watt amp and it BANGS!! you can light a lighter in the car when its on. . now i want to try out the trpe r.

Description
Reviews

Polk Audio DXI124 SVC 12in Single-Voice-Coil 720-Watts 4-Ohm Subwoofer - Black

This single-voice-coil subwoofer features Dynamic Balance driver technology for pure, distortion-free sound. The 720W peak power handling and 27Hz - 200Hz frequency response provide rich bass with a wide range of highs and lows for expressive sound.

Features
Handles up to 720W peak output 4 ohms
For powerful sound.
27Hz - 200kHz frequency response
For a wide range of accurate sound production.
88dB sensitivity
Picks up the highs and lows for faithful sound reproduction.
Polymer woofer cone
Produces rich, deep sound. The butyl rubber surround provides long-lasting use and withstands harsh conditions.
8 ohm impedance
Conducts power to keep speakers working at optimal levels.
High-temperature copper voice coil and polyamide former
Stand up to rigorous use while maintaining low distortion for punchy bass output.
Nickel-plated, heavy-duty input terminals
Accommodate speaker wire up to 8 AWG or twisted pairs of 12 AWG.
Klippel-optimized driver components
Provide optimal performance, even at extreme listening levels.

Specifications
Woofer Size: 12"
Woofer Material: Polymer composite
Magnet Size: 5-1/2"
Magnet Type: Ferrite
Continuous Power Handling: 360W
Peak Power handling: 720W
Impedance: 4 ohms
Connection Type: Nickel-plated fast-ons
Number of Voice Coils: 1
Efficiency: 88dB
Frame Material: Stamped steel
Surround Material: Rubber
Recommended Installation Type: Sealed box
Recommended Cubic Feet (box): 0.88 cu. ft.

Dimensions
Product Height 6-7/8"
Product Width 12-7/16"
Product Depth 6-5/16"
Woofer Size 12"

MFG: Polk Audio
MFG Part: DXI124 SVC

There are 5 review(s) for this product.

Customer Rating:

05/02/2012
Amazing sound for the price!!! by

I have this sub, just one, in a Fierce Audio XED bandpass enclosure and it's really impressive. Only running off an old 100 watt punch amp I took from my brother. I was expecting a little thump and everyone, including myself is blown away. Guy up the street has 2 L7 12's in a nice custom box and I am not far behind!!!! Truly unbelievable, don't pass this sub up seriously. If I had 2 with a stronger amp I would blow those expensive L7's away. I've had serious systems costing 5k and up in the past I know my stuff. Check this one out if looking for very great sound for an even better price.

Customer Rating:

02/15/2012
Love this! by BestBuyFreak05

Bought it to feel my box and amp simply because the last sub I had was blown. I absolutely love the quality for the price!

Customer Rating:

01/13/2012
Best Bang for Buck by alaws12

Truly. Bought on/near Black Friday for 55. I've been researching Polk for awhile and have only heard good things about them. Finally have one of my own, it is paired with a JL Audio Wv3 and it sounds awesome. Very Satisfied.

Customer Rating:

12/19/2011
Decent Subwoofer For The Price by AudioLover

Takes a decent amount of power for 360 Watts RMS and if you set it up right it'll sound very decent, solid bass and decent quality from Polk Audio. Very decent look to it with it's matte black painted cone with chrome painted letters and a durable rubber surround. Comes with 8 torque screws (So No Philips Head), so reminder you need a torque head to install these unless you use your own screws. The terminals or binding posts are just a plug and plan you'll need to either solder or get flat head plugs. Overall still a very decent Car subwoofer from Polk Audio at a reasonable price. Note: For about $100 more it comes in a Pre Built Polk Audio Enclosure which really makes this subwoofer sound the best, clean solid sound bass with great looks and design.

Customer Rating:

08/16/2010
great sub, good price by Nick1171

i have 1 12" hooked up to my alpine mono1000watt amp and it BANGS!! you can light a lighter in the car when its on. . now i want to try out the trpe r.

Page: 1 of 1